FRAME PLUS

Artworks Design Notice

Graphics Specification We have putting much importance to the best quality printing work. And we hope to ensure that Frame Plus will receive the high-quality images and artwork files for a desirable printing result. So, before uploading your artworks, please kindly read below artwork specs carefully and follow while designing. Failure to do so might result in delays.

You may also contact us for more help.

Contact us

Frame Plus

!! Copyright You have

Before uploading the logos, graphic designs, pictures and other copyrighted artworks, please make sure you have the copyright or you are authorized to use the images or files you upload.

Frame Plus will never be responsible for any infringement act. Hope your understanding!

More about the Files

there is something more you need to know

No.1

If you have some special fonts in your graphic, please outline all fonts or curves before uploading your artwork.

No.2

For some thin and small lines that are impossible to print out, we might make the font bold.

No.3

Please use letters and numbers to name the file, do not use symbol and special character.

NO.4

The maximum size of the file should be 200M. If you have much larger files, please contact our customer service representatives.

File Requirements

Acceptable file types include PDF, AI, PSD, JPG and PNG , among which AI and PDF are highly recommended. And files must be the same exact size as what is ordered.

The minimum resolution of images should be at least 72dpi and at 100% the physical size of the output. The higher-resolution artwork files are preferred, and 150-200dpi image is good for print.

Every single image saved as a file and not larger than 100MB each while upload online. Please contact our customer service team for any exterem large files before ordering.

FRAME PLUS

To compare the resolution before design

72dpi @ 100%

96dpi @ 100%

300dpi @ 100%

Artwork Templates

  • Artwork must be created using the provided templates. Our artwork templates include all the necessary measurements and bleeds, with the safe zone outlined in red dashed lines.

  • Please place your logo within the safe zone.

  • Do not alter the template lines in any way when creating your design.

  • Do not use any spot colors in your artwork. If you have specific colors in your graphic, they may require adjustments before we can print them accurately.

  • Do not put any notes, comments, or additional instructions in your file. Only include the graphics to be printed.

FRAME PLUS

About Color Matching

We use CMYK mode ONLY.

Please convert your files into CMYK prior to uploading. If not, our staff will convert your original file into CMYK mode. The conversion may cause the slight color difference. We cannot guarantee a 100% color match but will try to get as close as possible!

Contact us

FRAME PLUS

Artworks Upload & Approve

  • All your uploaded artwork must be vector files. If not, please contact our customer service reps to place the offline order.
  • Once your graphics have been received by our Graphics Department, we will review your files in the quickest possible time to ensure that your artwork has met the requirements to produce the best quality output graphics.
  • We will send an electronic proof in PDF format so you can see or show your client how the final project will look. We guarantee that we will not start any print work until having the final approval.
  • we manufacture all our core products in-house giving us complete control over the quality of our displays.